Chkdsk
Creates and displays a status report for a disk based on the file
system. Chkdsk also lists and corrects errors on the
disk. Used without parameters, chkdsk displays the
status of the disk in the current drive.
Syntax
chkdsk [volume:][[Path] FileName]
[/f] [/v] [/r] [/x] [/i] [/c] [/l[:size]]
Parameters
volume: : Specifies the drive letter (followed by a colon), mount
point, or volume name.
[Path] FileName : Specifies the location and name of a file or set of files
that you want chkdsk to check for fragmentation. You
can use wildcard characters (that is, * and ?) to
specify multiple files.
/f : Fixes errors on the disk. The disk
must be locked. If chkdsk cannot lock the drive, a
message appears that asks you if you want to check the drive the next time you
restart the computer.
/v : Displays the name of each file in
every directory as the disk is checked.
/r : Locates bad sectors and recovers
readable information. The disk must be locked.
/x : Use with NTFS only. Forces the volume to dismount first, if necessary. All open
handles to the drive are invalidated. /x also includes the functionality of /f.
/i : Use with NTFS only. Performs a less
vigorous check of index entries, reducing the amount of time needed to run chkdsk.
/c : Use with NTFS only. Skips the
checking of cycles within the folder structure, reducing the amount of time
needed to run chkdsk.
/l[:size] : Use with NTFS only. Changes
the log file size to the size you type. If you omit the size parameter, /l
displays the current size.
/?: Displays help at the command prompt.
Remarks
Running chkdsk
To run chkdsk on a fixed disk, you must
be a member of the Administrators group.
Checking a locked drive at restart
If you want chkdsk to correct disk
errors, you cannot have open files on the drive. If files are open, the
following error message appears:
Chkdsk cannot run because the volume is in use by another process.
Would you like to schedule this volume to be checked the next time the system
restarts? (Y/N)
If you choose to check the drive the next time you restart the
computer, chkdsk checks the drive and corrects errors
automatically when you restart the computer. If the drive partition is a boot
partition, chkdsk automatically restarts the computer
after it checks the drive.
Reporting disk errors
Chkdsk examines disk space and disk use for the file allocation
table (FAT) and NTFS file systems. Chkdsk provides
information specific to each file system in a status report. The status report
shows errors found in the file system. If you run chkdsk
without the /f command-line option on an active partition, it might report
spurious errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.
Fixing disk errors
Chkdsk corrects disk errors only if you specify the /f
command-line option. Chkdsk must be able to lock the
drive to correct errors. Because repairs usually change a disk's file
allocation table and sometimes cause a loss of data, chkdsk
sends a confirmation message similar to the following:
10 lost allocation units found in 3 chains.
Convert lost chains to files?
If you press Y, Windows saves each lost chain in the root directory
as a file with a name in the format Filennnn.chk.
When chkdsk finishes, you can check these files to
see if they contain any data you need. If you press N,
Windows fixes the disk, but it does not save the contents of the lost
allocation units.
If you do not use the /f command-line option, chkdsk
sends a message if a file needs to be fixed, but it does not fix any errors.
If you use chkdsk /f on a very large disk
(for example, 70 gigabytes) or a disk with a very large number of files (for
example, millions of files), chkdsk might take a long
time (for example, over several days) to complete. The computer is not
available during this time because chkdsk does not
relinquish control until it is finished.
Checking a FAT disk
Windows displays chkdsk status reports
for a FAT disk in the following format:
Volume Serial Number is B1AF-AFBF
72214528 bytes total disk space
73728 bytes in 3 hidden files
30720 bytes in 12 directories
11493376 bytes in 386 user files
61440 bytes in bad sectors
60555264 bytes available on disk
2048 bytes in each allocation unit
35261 total allocation units on disk
29568 available allocation units on disk
Checking an NTFS disk
Windows displays chkdsk status reports
for an NTFS disk in the following format:
The type of the file system is NTFS.
CHKDSK is verifying files...
File verification completed.
CHKDSK is verifying indexes...
Index verification completed.
CHKDSK is verifying security descriptors...
Security descriptor verification completed.
12372 kilobytes total disk space.
3 kilobytes in 1 user files.
2 kilobytes in 1 indexes.
4217 kilobytes in use by the system.
8150 kilobytes available on disk.
512 bytes in each allocation unit.
24745 total allocation units on disk.
16301 allocation units available on disk.
Using chkdsk with open files
If you specify the /f command-line option, chkdsk
sends an error message if there are open files on the disk. If you do not
specify the /f command-line option and open files exist, chkdsk
might report lost allocation units on the disk. This could happen if open files
have not yet been recorded in the file allocation table. If chkdsk
reports the loss of a large number of allocation units, consider repairing the
disk.
Finding physical disk errors
Use the /r command-line option to find physical disk errors in the
file system. For information about recovering physically damaged files with
recover, see Related Topics.
Reporting bad disk sectors
Bad sectors reported by chkdsk were
marked as bad when your disk was first prepared for operation. They pose no
danger.
Understanding exit codes
The following table lists the exit codes that chkdsk
reports after it has finished.
Exit code
Description
0
No errors were found.
1
Errors were found and fixed.
2
Disk cleanup, such as garbage collection, was performed, or cleanup
was not performed because /f was not specified.
3
Could not check the disk, errors could not be fixed, or errors were
not fixed because /f was not specified.
The chkdsk command, with different
parameters, is available from the Recovery Console.
Examples
If you want to check the disk in drive D and have Windows fix
errors, type:
chkdsk d: /f
If it encounters errors, chkdsk pauses
and displays messages. Chkdsk finishes by displaying
a report that lists the status of the disk. You cannot open any files on the
specified drive until chkdsk finishes.
To check all of files on a FAT disk in the current directory for
non-contiguous blocks, type:
chkdsk *.*
Chkdsk displays a status report, and then lists the files matching
the file specification that have non-contiguous blocks.
Formatting legend
Format
Meaning
Italic
Information that the user must supply
Bold
Elements that the user must type exactly as shown
Ellipsis (...)
Parameter that can be repeated several times in a command line
Between brackets ([])
Optional items
Between braces ({}); choices separated by pipe (|). Example: {even|odd}
Set of choices from which the user must choose only one
Courier font
Code or program output